Motul Sport Ester Up until now we pushed the Motul 8100 x-cess for daily and the 300v for our track cars. Recently Motul released their Motul Sport Ester which is the next step up from the 8100 x-cess and one step lower than the 300v. This means you can have all the benefits of a race oil but able to handle the rigors of daily drives and normal change intervals. So for all our Engine builds we do in house we will now start recommending this oil instead of the 8100 x-cess.Motul 8100 x-cess – For daily driving and performance drivingMotul Sport – Track enthusiast, built motors, and daily friendlyMotul 300v – Track only and should be changed after every eventTYPE OF USEVery high performance cars powered by diesel or gasoline, naturally aspirated or turbocharged multi-valve injection engines. Engines tuned operating in a wide range of rpm and temperatures, in the most severe driving conditions.Engines producing medium to high dilution in the oil..PERFORMANCESSTANDARDS: API SM / CFEster Technology: Ester based formula to ensure outstanding oil film resistance at very high temperature, for maximum horsepower, torque output and wear protection. Oil pressure is stable whatever the conditions of use.Very high API (American Petroleum Institute) performance level for improved oxidation resistance, improved deposit protection, better wear protection, and better low-temperature performance over the life of the oil. Perfect compatibility with the latest generations of engines requiring a lubricant with the specification API SM / CF.Motul Sport 5W-50 and 5W-40 grade allows excellent oil flow into the engine, faster oil pressure set up and faster revs rising.PROPERTIES5W-50Viscosity grade SAE J 300 5W-50Density at 20°C (59°F )ASTM D12980.845Viscosity at 40°C (104°F) ASTM D445 107.1 mm²/sViscosity at 100°C (212°F) ASTM D445 17.9 mm²/sHTHS viscosity at 150°C (302°F) ASTM D4741 4.5 mPa.sViscosity Index ASTM D2270 186Pour point ASTM D97 -45°C / -49°FFlash point ASTM D922 44°C / 471.2°FTBN ASTM D2896 8.4 mg KOH/g5W-40Viscosity grade SAE J 300 5W-40Density at 20°C (68°F) ASTM D1298 0.846Viscosity at 40°C (104°F) ASTM D445 87.3 mm²/sViscosity at 100°C (212°F) ASTM D445 14.4 mm²/sHTHS viscosity at 150°C (302°F) ASTM D4741 4.0 mPa.sViscosity Index ASTM D2270 171Pour point ASTM D97 -39°C / -38.2°FFlash point ASTM D92 240°C / 464°FTBN ASTM D2896 8.4 mg KOH/g
