Bullfinch BBQ/Gas Point – White

DescriptionIdeal for supplying:barbecues (BBQ)cooking appliancespatio heaters andother appliancesfor LPG (propane and butane) from the unit’s existing supply.Colour – WhiteNote the following features:complete with plug in tail connector and fixing screwsgood security – no connector, no flowpush and turn activationinnovative, attractive designhigh quality for a long reliable lifecompactlightweighteasy to fit – requires 60mm cutterwell styledhigh flow ratecomes with angled inlet connector as shownNett weight with connector – 515gConforms to BS EN 331 and BS EN 1949 and made under a certified ISO9001 systemGas inlet is suitable for 8mm tube (nut and olive provided) (thread on nut is 1/4in BSP)The Gas point comes complete with a Plug in tail connector for connecting onto the hose from the appliance. Inserting the tail connector and turning, locks it in place and allows the gas to flow.The Gas Point comes complete with fitting instructions. It should be installed by a competent Gas Safe (was CORGI) registered installer.It is also supplied with 4 fixing screws.You will need a 60mm cutter to create orifice.The metal pipe for the gas inlet needs to be 8mm.The hose for the Plug in tail connector needs to be 8mm bore LPG hose – our number 1319. You will also need suitable hose clips.Please note a gas cylinder should never be connected to the Gas point from the outside of the caravan or motor home. Technical DetailsWorking pressure – 7 bar (max)Conforms to BS EN 331 and BS EN 1949 and made under a certified ISO9001 systemCorrosion-resistant materials, LPG compatiblePlastic parts made of high quality materials with long-term UV resistanceTotal sealing between device and wall of prefabricated structureTotal sealing between cap and connection deviceDouble gasket for optimal long-term safetyDimensions – 105 x 110 x 85 (deep) mmBody – Hot forged brass alloy CW617Ball valve flare – Chrome/nickel plated brass alloy CW614Additional brass parts – Brass alloy CW614Plastic unit and cap – Polycarbonate reinforced with glass fibreLever handle – ABS (Acrylonitrile Butadiene Styrene) – UV stableHinges, springs and screws – stainless steelRubber gaskets – NBR conforming to EN549 standardWall gaskets and cap gaskets – UV, ozone resistant EPDMBall valve seals: – PTFE